Data
Matrix Laser Marking with
Innovative Optical Technology
2D barcode and Data Matrix
DataMatrix
is a two-dimensional barcode which can store from 1 to about
2,000 characters. The symbol is square and can range from
25 microns per side up to 30 cm per side. As an example
of density, 500 numeric only characters can be encoded in
a 25mm square. DataMatrix is being used to encode product
and serial number information on electrical rating plates;
to mark of surgical instruments in Japan; to identify lenses,
circuit boards, and other items during manufacturing.
DataMatrix symbols
require a 2-D scanner. they cannot be read using an ordinary
linear barcode scanner. A number of scanners are on the
market using both laser and CCD camera technologies. DataMatrix
symbols can be printed by thermal transfer label printer,
laser printer, mechanical punch and laser marking. |
Traditional Laser Marking DataMatrix
- Draw the square with round spot size, resolution
is limited.
- Need smaller spot to increase resolution, cost is
higher and speed is slower.
- The square area is unsteady, cause decoding issue.
|
K-Jet/NanoVia Hit Symbol Directly
- K-Jet/NanoVia develops the innovative optical technology
to transform the laser spot size into a rigid square form.
Thus we can hit each single square at a time, instead
of drawing.
- Symbol size can be up to hundreds microns, depending
on laser power. And down to several tens microns, depending
on materials.
- Redistributed energy provides a uniform mark and highest
contrast quality.
- Combined with gavonometer unit, this product could
provide ultra high marking speed. Typically 3-5 times
or higher than traditional way, depending on applications.
- Just simply replace an optical element, the laser type
could change to CO2, Nd:YAG, Green, or UV. That provides
a great flexibility and versatility for future requirement.
|
|
 |
 |
|
Laser Printer
|
Laser Drawing
|
K-JET/NanoVia
|
Specifications
CO2 Laser:
- Radio-frequency, Gas Medium.
- Wavelength: 10,640nm
- Power: 10 watts(25 watts Optional)
- Applications: Plastic, Wood, Glass, Rubber..etc.
|
Nd:YAG Laser:
- Diode-pumped Solid State
- Wavelength: 1,064nm
- Power: 10 watts(25, 30 watts Optional)
- Applications: Metal, Rubber, ABS,…etc.
|
Green Laser:
- Diode-pumped Solid State
- Wavelength: 532nm
- Power: 1.5 watts
- Applications: Silicon Wafer
|
UV YAG Laser:
- Diode-pumped Solid State
- Wavelength: 355nm
- Power: 1.5 watts(3.0 watts optional)
- Applications: Plastic, Diamond, Metal..etc.
|
Marking head:
- Speed: Over 300 symbols per second.
- Symbol: 25um~500um per side.
- Marking Area: 10mm x 10 mm(Lager or smaller
available)
|
Interface and Software:
- Intel Pentium III Processer
- Windows 98 Operation System
- DataMatrix Coding and Decoding Software
- Laser Control GUI Interface
|
|
|
|
